|Lasersafety – Gentec-eo – Laservision 2017 Highlights|
Gentec-eo partners with Te Lintelo Systems
We are very proud to announce that from now on we represent Gentec-EO in the BeNeLux area.
Our monitors come in various sizes and types to cover all applications. We have monitors with or without display (PC-based) and for power or energy readings, or both. We also offer the fastest digital needle display on the market.
Get accurate measurements with fast response times with our thermopile or pyroelectric power meters. Available with various absorbers, with the highest damage thresholds you can find in their category, our power meters cover a wide range going from the nanowatts to multi-kilowatts. The power meters can be connected with a computer via USB or Bluetooth.
Our pyroelectric energy meters cover a very wide range, going from nanojoules to several tens of joules per pulse. They also come in various sizes, from 8 mm to 95 mm in diameter and most of them are available with an optional attenuator. The energy meters can be connected with a computer via USB/RS-232 (Integra) or Bluetooth (Available Fall 2017).
Our photo detectors are offered for both power and energy measurements. Measure as low as a few femtojoules in energy or a few picowatts in power, thanks to our highly sensitive sensors and performant electronics. The photo detectors can be connected with a computer via USB/RS-232 (Integra).
Beam diagnostics – We offer camera-based devices with wavelength ranges from UV to IR. All are cameras are USB3.0, for the fastest data transfer rates. We also offer the Beamage-M2. This is an automated laser beam quality measurement system. The only M² system on the market equipped with a complete set of 50mm optics. Also, the sensor is 11.3 x 11.3 mm.
THz detectors are pyroelectric-based and can thus be used very easily, and at room temperature. You can choose either a standalone head with on-board electronics or go with our T-Rad meter and a separate sensor.
OEM Detectors – Almost anything you see in our product line can be turned into an OEM unit! We also offer standard OEM products, at different levels of integration: from the simple thermopile disk to a complete head with internal PCB for signal anticipation and amplification.
Special products like the Ultrafast Joulemeter and Position Sensing Detectors. The Ultrafast Joulemeter is the fastest energy meter on the market. It enables you to measure the pulse energy of every pulse up to 200 kHz. The QUAD-4Track is a Laser Position Sensing system. It is fast and can be used to track, align and/or measure laser beam movement in real time, with a resolution of just a few microns!
The calibration of measurement equipment and therefore the traceability of measurement and test results to national standards is a basic requirement for every quality assurance system. We therefore provide calibration services for Gentec’s monitors and power and energy meters. Calibration service ensures traceability to the National Institute of Standards and Technology (NIST) and the Physikalische Technische Bundesanstalt (PTB) (Physical Technical Federal Institute). The processing time of a calibration typically lasts only 10 working days.
We Protect Your Eyes
Based on more than 30 years of history, LASERVISION has a long lasting experience on all relevant fields of laser safety.
A careful selection of the right filter resp. filter technology in accordance to the calculated and required protection levels and the requirements of the application pose an important challenge.
Our Laser Safety Officer Danny van Dongen, will help you with selecting the right products for your “dangerous” laser radiation situation. We can also arrange a Laser safety training. Get in touch with Danny to discuss your situation.
Special end of year promo
We know that everyone goes through last minute purchasing decisions toward the end of the year.
If you decide to buy products from both Gentec-EO and LASERVISION, you will be rewarded a 7,5% discount.
LED event 2017 Belgium and The Netherlands
The LED Event takes place in Technopolis, Mechelen, on the 30th of November and in Congres centre 1931 Brabanthallen in Den Bosch on the 1st of December.
Meet us @ Precision fair, 15 – 16 November 2017
On 15 and 16 November 2017, the 17th edition of the successful Precision Fair takes place.
Meet us and our partners SIOS & LASOS at booth 95 at the precision fair!
This event is accessible free of charge and takes place at NH Conference Centre Koningshof, Veldhoven.
Te Lintelo Systems will be there on the same spot as last year (and the years before.)
We look forward to supplying you with all the material and information you need and answering any question.
You have received this email message because you are a newsletter subscriber, past customer, previously requested information or contacted us about Te Lintelo System’s products or services.