Newsflash January 2018

Best Wishes!

The team of Te Lintelo Systems wishes a healthy & prosperous 2018 for you, your family and friends.

As we expect most product releases and updates later this month, just before or during the SPIE Photonics West show. For the moment we have some updates for you:

• Increase Pulse Energy @ 355 nm
• Stackable CW & Pulsed laser diode driver
• BLU wireless powermeter
• Portable PAR meter

Enjoy reading,
Esther, Ben, Monique, Danny & Roland

Photonics Industries Increases Laser Pulse Energy @ 355nm

Photonics Industries, has increased the pulse energy of its DSH Series UV ns laser to >1mJ. The DSH-355-40 laser is a compact, nanosecond UV@355nm laser utilizing patented intracavity UV generation with Total Pulse Control (e.g., individually triggered pulses on demand) to achieve up to 50W of output power.

Increasing the power and pulse energy of UV lasers is in demand due to the desire to increase the speed in mobile device and flat panel display manufacturing applications. With the DSH-355-40 laser, industrial micromachining customers can process materials at a much quicker, more efficient rate, expediting their manufacturing processes with small amount of cost increase to yield 2x or more throughput for a large number of applications. Furthermore, the highest pulse energy >1mJ enables applications which were not possible in the past.

The new DSH-355-40 UV ns laser also typically provides <1% P-P stability with typical beam quality of M2<1.1 with the he lowest COO in the market. It’s All-in-One (AIO) compact, Industry grade single box design is the smallest footprint with the lowest power consumption. The AIO single box design sim­plifies installation by removing the need to manage a separate controller/power supply box and umbilical cable — not only yielding space savings, but also better reliability. Eliminating the driver and umbilical, the new DSH-355-40 is so lightweight and robust it can be vertically mounted on gantry for robotic applications.

See the DSH-355-40 laser in action here

Stackable CW & Pulsed Laser Diode Driver Model 787

The Model 787 OEM laser diode driver is a highly efficient, current regulated, low ripple tri-phase laser diode driver designed to power pulsed and CW high current laser diode stacks.

Proprietary technology allows AMI to offer a 50A, 5.0V driver with industry leading efficiency of 96% in a compact footprint. Multiple drivers can be stacked together to achieve output currents of 200A or higher.

The driver includes open circuit, short circuit, over-temperature and under voltage lockout protection.

For detailed specifications and outline drawings on the Model 787,

view the product data sheet here.

BLU wireless power meter

This new line of All-in-One detectors combine a detector and a meter with Bluetooth connectivity in one convenient product. The small but powerful meter of the BLU Series presents a Bluetooth connection so you can display the results on your mobile device with the Gentec-EO BLU app available for both iOS and Android systems. Need to use it with a PC? Simply plug in the included Bluetooth receptor and be ready to make power or energy measurements within seconds!

• All-in-one detector + meter This new line of All-in-One detectors combine a detector and a meter with Bluetooth connectivity in one convenient product. No need to carry a meter!
• Safer work environment Operators can be far from the detector while making measurements (up to 30m, depending on the environment and barriers). And with less cables in the workspace, accidents are less likely to happen!
• Extensive coverage Receive data at up to 30m from the detector, with the same performance as the usual detector + monitor combination.
• Long battery life The USB-rechargeable Li-ion battery lasts up to 5 continuous days with the device running
• Go wireless No need to worry about cable length or monitor location

more info can be found here.

portable PAR meter

Measurement and examination of the photosynthetically active radiation (PAR), R/FR, DLI, illuminance, luminous color, color rendering index, scotopic to photopic ratio, EVE factor , spectrum of LEDs and other lights.

The BTS256-PAR is a high-quality light meter that is well suited for illuminance and luminous color measurements in all application areas thanks to its compact design, high-quality light sensor and precise cosine field of view function.

DIN quality class A and B luxmeter

Through the cutting-edge Bi-Technology sensor concept, use of modern electronics, online dark signal adjustment and the possibility to perform temperature compensation, the device meets the conditions specified for two of the DIN 5036 quality classes.

• In terms of the f2 uncertainty i.e. ≤ 3%, the device corresponds to the quality class B (DIN 5032 section 7).
• In applications where limitation of the viewing angle is acceptable, the BTS256-PAR, with its f1’, u, f3 and f4 values, corresponds to the quality class A (DIN 5032 section 7).

More info can be found here.

We look forward to supplying you with all the material and information you need and answering any question.
For more information please contact Your team:

Roland	Monique	Danny	Esther	Ben

Te Lintelo Systems BV – Mercurion 28 A – 6903 PZ  Zevenaar – The Netherlands
+31 316 340804 – contact@tlsbv.nl – www.tlsbv.nl

You have received this email message because you are a newsletter subscriber, past customer, previously requested information or contacted us about Te Lintelo System’s products or services. To ensure that you continue to receive emails from us, add marketing@tlsbv.nl to your Address Book and your Approved Sender List, and have our email address white listed with your Company.